 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Product Description Sirenza Microdevices SNA-376 is a GaAs monolithic broadband amplifier (MMIC) housed in a low-cost surface mountable stripline package. This amplifier provides 22dB of gain when biased at 35mA. External DC decoupling capacitors determine low frequency response. The use of an external resistor allows for bias flexibility and stability. These unconditionally stable amplifiers are designed for use as general purpose 50 ohm gain blocks. Also available in chip form (SNA-300), its small size (0.33mm x 0.33mm) and gold metallization make it an ideal choice for use in hybrid circuits. Output Power vs. Frequency 12 11 SNA-376 DC-3 GHz, Cascadable GaAs MMIC Amplifier Product Features Cascadable 50 Ohm Gain Block 22dB Gain, +10dBm P1dB 1.5:1 Input and Output VSWR Operates From Single Supply Low Cost Stripline Mount Ceramic Package Hermetically Sealed Applications PA Driver Amplifier Cellular, PCS, GSM, UMTS IF Amplifier Wireless Data, Satellite Units dB dB dB dB GHz dBm dBm dB dBm 10 9 8 0.1 0.5 1 1.5 2 4 6 8 10 GHz Sy mbol GP GF BW3dB P1dB Parameter Small Signal Pow er Gain Gain Flatness 3dB Bandw idth Output Pow er at 1dB Compression Frequency 850 M Hz 1950 M Hz 2400 M Hz 0.1-3 GHz Min. 21.0 Ty p. 23.0 22.0 21.5 +/- 1.5 Max. 3.0 1950 M Hz 1950 M Hz 1950 M Hz 0.1-3 GHz 0.1-10 GHz 3.3 30 10.0 23.0 4.0 1.5:1 23.0 3.7 35 -0.003 OIP3 NF VSWR ISOL VD Output Third Order Intercept Point Noise Figure Input / Output Reverse Isolation dB V Device Operating Voltage Device Operating Current Device Gain Temperature Coefficient 4.3 40 ID dG/dT mA dB/C C/W RTH, j-l Thermal Resistance (junction to lead) 400 Test Conditions: VS = 8 V RBIAS = 120 Ohms ID = 35 mA Typ. TL = 25C OIP3 Tone Spacing = 1 MHz, Pout per tone = 0 dBm ZS = ZL = 50 Ohms The information provided herein is believed to be reliable at press time. Sirenza Microdevices assumes no responsibility for inaccuracies or omissions. Sirenza Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the users own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Sirenza Microdevices does not authorize or warrant any Sirenza Microdevices product for use in life-support devices and/or systems. Copyright 2001 Sirenza Microdevices, Inc.. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94085 Phone: (800) SMI-MMIC 1 http://www.sirenza.com EDS-102433 Rev A Preliminary SNA-376 DC-3 GHz Cascadable MMIC Amplifier Typical Performance at 25 C (Vds = 3.7V, Ids = 35mA) |S11| vs. Frequency 0 -10 23 21 |S21| vs. Frequency dB -20 -30 -40 0.1 0.5 1 1.5 2 2.5 3 3.5 4 dB 19 17 15 0.1 0.5 1 1.5 2 2.5 3 3.5 4 GHz GHz |S12| vs. Frequency 0 -5 -10 0 |S22| vs. Frequency -10 dB -15 -20 dB -20 -30 -25 -30 0.1 0.5 1 1.5 2 2.5 3 3.5 4 -40 0.1 0.5 1 1.5 2 2.5 3 3.5 4 GHz GHz Noise Figure vs. Frequency 5 4.5 TOIP vs. Frequency 26 24 dB 4 3.5 3 0.1 0.5 1.0 1.5 2.0 2.5 3.0 dBm 22 20 0.5 1 1.5 2 2.5 3 3.5 4 GHz GHz GHz Absolute Maximum Ratings Parameter Absolute Limit 70 mA 6V +10 dBm +150C -40C to +85C +150C Device Voltage vs. Id 5 4.5 Max. Device Current (ID) Max. Device Voltage (VD) Max. RF Input Pow er Max. Junction Temp. (TJ) Operating Temp. Range (TL) Vdc 4 3.5 3 20 25 30 35 40 45 50 Max. Storage Temp. mA Operation of this device beyond any one of these limits may cause permanent damage. For reliable continous operation, the device voltage and current must not exceed the maximum operating values specified in the table on page one. Bias Conditions should also satisfy the follow ing expression: IDVD < (TJ - TL) / RTH, j-l 522 Almanor Ave., Sunnyvale, CA 94085 Phone: (800) SMI-MMIC 2 http://www.sirenza.com EDS-102433 Rev A Preliminary SNA-376 DC-3 GHz Cascadable MMIC Amplifier Application Circuit Element Values Typical Application Circuit R BIAS 1 uF 1000 pF Reference Designator Frequency (Mhz) 500 850 1950 2400 3500 CB 220 pF 100 pF 68 nH 100 pF 68 pF 33 nH 68 pF 22 pF 22 nH 56 pF 22 pF 18 nH 39 pF 15 pF 15 nH CD LC CD LC RF in CB 1 4 SNA-376 3 CB RF out Recommended Bias Resistor Values for ID=35mA RBIAS=( VS-VD ) / ID Supply Voltage(VS) RBIAS 5V 36 6V 68 8V 120 10 V 180 2 Note: RBIAS provides DC bias stability over temperature. Simplified Schematic of MMIC Pin # Function RF IN Description RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. Connection to ground. For optimum RF performance, use via holes as close to ground leads as possible to reduce lead inductance. Part Identification Marking The part will be marked with an S3 designator on the top surface of the package. 4 1 2, 4 GND 1 S3 2 3 3 RF OUT/ RF output and bias pin. DC voltage is BIAS present on this pin, therefore a DC blocking capacitor is necessary for proper operation. Part Number Ordering Information Caution: ESD sensitive Part Number SNA-376-TR1 SNA-376-TR2 SNA-376-TR3 Reel Size 7" 13" 13" Devices/Reel 1000 3000 5000 Appropriate precautions in handling, packaging and testing devices must be observed. 522 Almanor Ave., Sunnyvale, CA 94085 Phone: (800) SMI-MMIC 3 http://www.sirenza.com EDS-102433 Rev A |
Price & Availability of SNA-376
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |